EnergyMax-USB J-50MB-IR Energy Sensor

EnergyMax-USB J-50MB-IR Energy Sensor

SKU 1191440
UOM Each

USB-enabled, 3.2 mJ to 3J pulse energy sensor, rep. rate up to 30 pps, 0.5 to 3.0 µm spectral range, 30 mm diameter maximum beam size.


Price $2,970.00


Details

Pyroelectric energy sensor with MaxBlack coating and diffuser for measuring laser pulses from 3.2 mJ to 3J at up to 30 pps. Direct USB interface.

 Key Features:

  • 500 nm to 3.0 µm spectral range
  • 35 mm diameter active area
  • 3.2 mJ to 3J energy range
  • 30 pps repetition rate operation
  • Direct USB interface
  • ISO 17025 accredited

The J-50MB-IR energy sensor is specifically design for high energy and high peak power Erbium and Holmium medical lasers. This sensor is like the J-50MB-YAG, but is designed to operate further in the infrared.

The EnergyMax-USB J-50MB-IR energy sensor is terminated in a USB cable that interfaces directly to a PC. A DB25 model (PN 1155722) is available.

A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.

Specs

General

Cable Type
USB
Active Area Diameter
50 mm
Detector Coating
MaxBlack
Energy Range
3.2 mJ to 3J
Wavelength Range
500 nm to 3 µm
Noise Equivalent Energy
<320 µJ
Maximum Pyroelectric Rep. Rate (pulses per second)
30
Wavelength Range (micrometers)
0.5 to 3.0
Maximum Average Power (watts)
15
Maximum Pulse Width (microseconds)
1000
Maximum Energy Density (millijoules per square centimeter)
>100 (at 2940 nm, 100 μs)
Diffuser
IR
Calibration Uncertainty (%)(k=2)
±2 at 1064 nm, ±3 at 2940 nm
Energy Linearity (%)
±3.5
Calibration Wavelength (nanometers)
1064, 2940
Cable Length (meters)
3
Maximum Beam Size (millimeters)
30mm