EnergyMax-USB J-50MT-10KHZ Energy Sensor
EnergyMax-USB J-50MT-10KHZ Energy Sensor
SKU
1191447
UOM
Each
USB-enabled, 400 µJ - 1J pulse energy sensor, rep. rate up to 10000 pps, metallic coating with 0.19 to 2.1 µm spectral range, 50 mm diameter active area.
Price
$3,165.00 USD
Details
Pyroelectric energy sensor with MaxBlack coating for measuring laser pulses from 400 µJ - 1J at up to 10000 pps. Direct USB interface.
Key Features:
- 190 nm to 2.1 µm spectral range
- 50mm diameter active area
- 400 µJ - 1J energy range
- 10000 pps repetition rate operation
- Direct USB interface
- ISO 17025 accredited
The EnergyMax-USB J-50MT-10KHZ energy sensor is terminated in a USB cable that interfaces directly to a PC. A DB25 model (PN 1110574) is available.
A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.
Specs
General
Cable Type
USB
Active Area Diameter
50 mm
Detector Coating
Diffuse Metallic
Energy Range
400 µJ to 1J
Wavelength Range
190 nm to 2100 nm
Noise Equivalent Energy
<40 µJ
Maximum Pyroelectric Rep. Rate (pulses per second)
10000
Wavelength Range (micrometers)
0.19 to 2.1
Maximum Average Power (watts)
20
Maximum Pulse Width (microseconds)
1.7
Maximum Energy Density (millijoules per square centimeter)
500 (at 1064 nm, 10 ns)
Diffuser
No
Calibration Uncertainty (%)(k=2)
±2
Energy Linearity (%)
±3
Calibration Wavelength (nanometers)
1064
Cable Length (meters)
3
Accessories
Large Heat Sink
1123432
$195.00 USD
Pyroelectric Test Slide - Diffuse Metallic Coating
1171292
$75.00 USD