PMP HP -- Fast Power Sensor

PMP HP -- Fast Power Sensor

SKU 1286588
UOM Each

1 to 350W fast power sensor, up to 15 kW peak power, water-cooled, 700 nm to 1070 nm; 10.6 µm spectral range, 25 mm maximum beam size. Can handle up to 15 kW for durations less than 100 msec to enable rapid measurement of laser bursts without water cooling.


Price $2,975.00 USD


Details

Fast, thin-film transverse thermoelectric, water-cooled power sensor with diffuser for measuring lasers between 1W and 350W. Can handle up to 15 kW for durations less than 100 msec to enable rapid measurement of laser bursts without water cooling.

 

Key Features:

  • 1 to 350W range
  • Up to 15 kW peak power
  • Fast thin-film detector
  • ZnSe diffuser to increase power handling
  • 10 µsec rise time
  • 25mm diameter maximum beam size
  • 700 nm to 1070 nm; 10.6 µm spectral range
  • Water-cooled; (up to 22W air-cooled)
  • ISO 17025 accredited

This PowerMax-Pro HP sensor incorporates a fast thin-film detector technology that responds in tens of microseconds.  This model incorporates a ZnSe diffuser to enable higher powers and can handle up to 350W average power with water-cooling, 22W average power air-cooled, and up to 15 kW peak power for durations less than 100 milliseconds for measurement of short laser bursts without water cooling.

The sensor is terminated in a SmartProbe DB25 cable and requires the LabMax-Pro SSIM meter (PN 1268881) to take advantage of its high-speed features.  A USB-direct model (PN 1315456) is available.

Resources

Datasheets
Drawings

Specs

General

Cable Type
DB-25
Cooling Type
Water/Air
Active Area Size
25 mm (diameter)
Detector Coating
HD
Power Range for Continuous Usage Air Cooled
1W to 22W
Power Range for Continuous Usage Water-cooled
1W to 350W
Wavelength Range
700 nm to 1070 nm; 10.6 µm
Max Peak Power (for modulated lasers)
15000 (10 ms), 10000 (50 ms), 5000 (100 ms)
Maximum Intermittent Power (watts) (air-cooled <5 minutes)
75
Noise Equivalent Power (milliwatts) Standard Mode
25
Noise Equivalent Power (milliwatts) High Speed Mode
100
Noise Equivalent Power (milliwatts) Snapshot Mode
300
Maximum Power Density (kilowatts per square centimeter)
1.2 (at 150W)
Max. Peak Power Density (kilowatts per square centimeter)
50 (1 msec; 1064 nm)
Rise Time (microseconds)
<10
Minimum Beam Size (millimeters)
Set by damage threshold specs
Calibration Uncertainty (%)(k=2)
±2
Power Linearity (%)
±2 (1W-10 kW); 3-10 (10-15 kW) (see datasheet for beam size and pulse length dependencies)
Spectral Compensation Accuracy (%)
±5
Calibration Wavelength (nanometers)
801
Cable Length (meters)
2.5 (8.2 ft.)
Max. Energy Density
30 J/cµm (3 msec; 755 nm)
Spatial Uniformity (%)(center 75% of aperature; 2.5 millimeter beam)
±5