PMP RS 2K HP -- Fast Power Sensor

PMP RS 2K HP -- Fast Power Sensor

SKU 1315457
UOM Each

RS232-enabled, 3 to 350W fast power sensor, up to 2 kW peak power, water-cooled, 700 nm to 1070 nm; 10.6 µm spectral range, 25 mm maximum beam size.


Price $3,975.00 USD


Details

Fast, thin-film transverse thermoelectric, water-cooled power sensor with diffuser for measuring lasers between 3W and 350W. Can handle up to 15 kW for durations less than 100 msec to enable rapid measurement of laser bursts without water cooling. Direct RS232 interface.

 

Key Features:

  • 3 to 350W range
  • Up to 2 kW peak power
  • Fast thin-film detector
  • ZnSe diffuser to increase power handling
  • 10 µsec rise time
  • 25mm diameter maximum beam size
  • 700 nm to 1070 nm; 10.6 µm spectral range
  • Water-cooled; (up to 22W air-cooled)
  • Direct RS232 interface
  • ISO 17025 accredited

This PowerMax-Pro RS 2K HP sensor incorporates a fast thin-film detector technology that responds in tens of microseconds.  This model incorporates a ZnSe diffuser to enable higher powers and can handle up to 350W average power with water-cooling, 22W average power air-cooled, and up to 2 kW peak power for durations less than 100 milliseconds for measurement of short laser bursts without water cooling.

The sensor is terminated in a USB cable for directly interfacing with a PC.  A DB25 model (PN 1286588) is available.

Resources

Datasheets
Owner's Manuals
Owner's Manuals
Drawings
Software
Software
Software

Specs

General

Cable Type
RS232
Cooling Type
Water/Air
Active Area Size
25 mm (diameter)
Detector Coating
HD
Power Range for Continuous Usage Air Cooled
3W to 22W
Power Range for Continuous Usage Water-cooled
3W to 350W
Wavelength Range
700 nm to 1070 nm; 10.6 µm
Max Peak Power (for modulated lasers)
2000W (> 1 µsec pulses)
Maximum Intermittent Power (watts) (air-cooled <5 minutes)
75
Noise Equivalent Power (milliwatts) Standard Mode
150
Noise Equivalent Power (milliwatts) High Speed Mode
200
Noise Equivalent Power (milliwatts) Snapshot Mode
300
Maximum Power Density (kilowatts per square centimeter)
1.2 (at 150W)
Max. Peak Power Density (kilowatts per square centimeter)
50 (1 msec; 1064 nm)
Rise Time (microseconds)
<10
Minimum Beam Size (millimeters)
Set by damage threshold specs
Calibration Uncertainty (%)(k=2)
±2
Power Linearity (%)
±2
Spectral Compensation Accuracy (%)
±5
Calibration Wavelength (nanometers)
801
Cable Length (meters)
4.2m (13.8 ft.)
Max. Energy Density
30 J/cµm (3 msec; 755 nm)
Spatial Uniformity (%)(center 75% of aperature; 2.5 millimeter beam)
±5