PM150-50C

PM150-50C

SKU 1098412
UOM Each

300 mW to 150W power sensor, 0.25 to 11 µm spectral range, 50 mm diameter active area.


Price $1,330.00 USD


Details

Water-cooled thermopile sensor for measuring pulsed & CW lasers between 300 mW and 150W. It can be used to measure 80W without water, intermittently, for up to five minutes.

 

Key Features:

·      300 mW to 150W range

·      50 mm diameter active area

·      Spectrally flat broadband coating

·      0.25 to 11 µm spectral range

·      Water-cooled

·      ISO 17025 accredited

This PM150-50C sensor is a water-cooled laser power sensor intended for measuring lasers up to 150W with water, and up to 80W without water for short durations (up to five minutes at a time).  This sensor model is also very commonly used for individual long-pulse energy measurements up to 150J.

The sensor is terminated in a SmartSensor DB25 cable and is directly compatible with all power meters in the catalog.  A USB-direct model (PN 1168348) is available.

Resources

Datasheets
Drawings

Specs

General

Cable Type
PM DB-25
Cooling Type
Water, Air (intermittent)
Power Range
300 mW to 150W
Active Area Diameter
50 mm
Detector Coating
Broadband
Noise Equivalent Power (milliwatts)
1
Maximum Intermittent Power (watts)(<5 minutes)
80
Long-Pulse Joules Range (joules)
1 to 150
Wavelength Range (micrometers)
0.25 - 11
Maximum Power Density (kilowatts per square centimeter)
6
Maximum Energy Density (millijoules per square centimeter)
600, 1064 nm, 10 ns
Response Time, Speed-up On, 0% to 95% (seconds)
5
Window
None
Diffuser
None
Calibration Uncertainty (%)(k=2)
±1
Power Linearity (%)
±1
Spectral Compensation Accuracy (%)
±1.5
Calibration Wavelength (nanometers)
514
Cable Length (meters)
2