Accessories for CUBE Laser Products
For CUBE Laser, connects laser to the following: Power cable, I/O Interface Control cable, RS-232 Serial cable, Control Box (Keyswitch, Analog Modulation and Interlock)
Connects to CUBE Laser Interface Cable (I/O Interface Control connector), 8 Pin. Offers flying leads to then have connections for input and output, control and signals, from the CUBE Laser.
For CUBE Laser, Output: 6 Volts DC, 2.5 A, On/Off Toggle Switch, Power On LED Indicator
Input: 90 – 264 Volts AC, 47 – 63 Hz, < 0.5 A (maximum) Power Consumption
For CUBE Laser, includes an On / Off key switch, an interlock circuit, BNC connector for Analog modulation up to 350 kHz, LED indicator, and a 5-second delay for CDRH regulations.
Optional Heat Sink Mount for CUBE Laser. This mount was designed for proper thermal heat dissipation and mechanical positioning.
Allows the CUBE Laser to be rotated 90 degrees without a change in beam position. CUBE pointing stability and environmental specifications are maintained with the use of the Right-Angle bracket with integrated heat sink. Commonly used to change the CUBE laser polarization from vertical to horizontal.
USB Cable for use with CUBE Laser, Type A connector to Type B-Mini connector, 28 AWG, with ferrite core
USB 2.0 Type B male to Serial 9-pin male with 3 ft USB cable. Allows connection of a serial RS-232 device (CUBE laser) to a host computer with a USB Type-A port. Three foot detachable USB Type-A Male to USB Type-B Male cable included. Compatible with Windows XP, 7, and 10.
10 A, 125 VAC, 18 AWG, 3 conductors, IEC-320
A secondary emission indicator lamp for laser emission can be mounted remotely at a distance up to five meters (16 ft.) from the CUBE laser and connects to the CUBE Interface Cable (I/O Interface Connector).
CUBE Laser Operator’s Manual and Coherent CUBE Connection Applications Software for Windows XP, 7, and 10.