Laser Accessories

OBIS LX/LS Scientific Remote with six 1 meter SDR laser cables

SKU: 1234466

OBIS Scientific Remote with touchscreen and internal power supply, includes six 1-meter SDR cables

OBIS SDR Cable, Laser-to-Remote, 1 meter

SKU: 1179451

OBIS Laser-to-Remote SDR Cable, 1 meter

OBIS SDR Cable, Laser-to-Remote, 3 meters

SKU: 1179858

OBIS, SDR Cable, Laser-to-Remote, 3 meters

OBIS SDR Cable, Laser-to-Remote, 0.3 meter

SKU: 1197523

OBIS SDR Cable, Laser-to-Remote, 0.3 meter

OBIS LX/LS Power Supply, 12VDC Output

SKU: 1184491

Power Supply for OBIS LX or LS lasers. Power Supply for OBIS LX/LS Single Laser Remote. 110V/220 Volts AC input with IEC-320, 12 Volts DC Output, Compliant to both IEC 60950 and IEC 62368. Also compliant to UKCA. Does not include power cord to wall.

12V Power Supply for FieldMate, FieldMaxII, LabMax, LabMax-Pro, StingRay

SKU: 1105427

12V External Power Supply for FieldMate, FieldMaxII, LabMax, LabMax-Pro, and StingRay/Bioray Controller.

CUBE Interface Cable, Quattro

SKU: 1072166

For CUBE Laser, connects laser to the following: Power cable, I/O Interface Control cable, RS-232 Serial cable, Control Box (Keyswitch, Analog Modulation and Interlock)

CUBE Power Supply, 6 Volts DC Output

SKU: 1072454

For CUBE Laser, Output: 6 Volts DC, 2.5 A, On/Off Toggle Switch, Power On LED Indicator

Input: 90 – 264 Volts AC, 47 – 63 Hz, < 0.5 A (maximum) Power Consumption

CUBE Control Box, CDRH Compliant

SKU: 1039966

For CUBE Laser, includes an On / Off key switch, an interlock circuit, BNC connector for Analog modulation up to 350 kHz, LED indicator, and a 5-second delay for CDRH regulations.

CUBE Heat Sink

SKU: 1073840

Optional Heat Sink Mount for CUBE Laser. This mount was designed for proper thermal heat dissipation and mechanical positioning. 

High-Speed USB-to-Serial RS-232 Adapter

SKU: 1415602

USB 2.0 Type B male to Serial 9-pin male with 3 ft USB cable. Allows connection of a serial RS-232 device (CUBE laser) to a host computer with a USB Type-A port. Three foot detachable USB Type-A Male to USB Type-B Male cable included. Compatible with Windows XP, 7, and 10.

ASE Filter, 405 nm, for OBIS LX Single Frequency Lasers

SKU: 2253957

OBIS LX ASE Filter can reduce noise in applications that are sensitive to shorter or longer wavelength emissions. The OBIS LX ASE Filter can help to improve your detection signal to noise ratio.

ASE Filter, 633 nm, for OBIS LX Single Frequency Lasers

SKU: 2253959

OBIS LX ASE Filter can reduce noise in applications that are sensitive to shorter or longer wavelength emissions. The OBIS LX ASE Filter can help to improve your detection signal to noise ratio.

ASE Filter, 785 nm, for OBIS LX Single Frequency Lasers

SKU: 2254008

OBIS LX ASE Filter can reduce noise in applications that are sensitive to shorter or longer wavelength emissions. The OBIS LX ASE Filter can help to improve your detection signal to noise ratio.

Mount for VLM2 Laser Diode Module. Ball Mount

SKU: 0221-437-00

Tip/Tilt design with a ball mount to align the laser module. 14.8mm bore and setscrews to hold laser. 1/4"-20 mounting hole in base.

Mount for VLM3 Laser Diode Module. Ball Mount

SKU: 0221-448-00

Tip/Tilt design with a ball mount to align the laser module. 9.5mm bore and setscrews to hold laser. 1/4"-20 mounting hole in base.

Mount for Ultra Low Noise (ULN) Laser Diode Module. Ball Mount

SKU: 0221-449-00

Tip/Tilt design with a ball mount to align the laser module. 19mm bore and setscrews to hold laser. 1/4"-20 mounting hole in base.

Power Supply for VLM2 or VLM3 laser modules.

SKU: 31-1001-000

Power Supply for Laser Modules with 3.5mm Jack Plug. Input 90-250 VAC. Output 5 VDC.

3.5mm Jack Plug for VLM lasers

SKU: 1057734

Add a plug to the flying leads of any VLM series laser to then have it connect easily to the power supply.